16
English
USING BLENDER
•
Never open the lid when the blade is still rotating. For extra caution, you can unplug the
appliance before removing the lid.
•
To add liquid ingredients during processing, remove the measuring cup of the lid and pour
liquid through the opening in the lid.
•
Cut solid ingredients into smaller pieces before you process them.
•
For a large quantity, pour small batches of ingredients instead of a large quantity at one time.
•
Use cooked ingredients for a soup preparation.
•
If a liquid is hot or tends to foam (e.g. milk), do not put more than 1 litre in the blender jar to
avoid spillage.
• If the result is is not satisfactory, switch the appliance off and stir the ingredients with a
spatula.
WARNING: Run the blender within 2 min. and then rest at least 1 min. Do not use the
machine for more than two operations. Allow it to cool between operations.
2
1
3
4
1.
Follow the diagram flow pictured above for step by
step assembly.
2.
Turn the jar (8) upside down and place the elements in
the right order on the jar (8).
3.
Place the sealing ring (7) on the collar of the
jar (8) and insert the cutting blade unit into
the jar (8).
4.
Place the jar base (6) on the jar (8) and turn it clockwise
until you start to feel resistance. Do not use excessive
force.
WARNING: Failure to observe this point may damage the device!
5.
Place the assembled jar unit in the motor block (1). Grab the jar base (6) and turn it clockwise
until you hear a security lock click. Do not tighten the jar unit by holding the jar holder.
WARNING
: Never lock/unlock the jar unit in the motor unit by using the jar holder!
WARNING: Failure to observe this point may damage the device!
1
2
3
6.
After placing the ingredients in the jar (8), close it by using the
cover (9).
7.
Place the cover cap (10) in the main cover (9) hole and turn it
clockwise until it locks.
8.
To remove the jar (8) from the motor unit (1), repeat step 5 in
the reverse order. Then grab the jar by the jar holder and lift
it up.
9.
Do not move the jar. Keep the lid on when the machine is
operating.
10. To keep the best processing result use the Max speed or Pulse
speed.
11.
To use the filter (26) insert it according to the marked grooves into
the blender’s jar until it stops.
Summary of Contents for MULTIMAX Premium Series
Page 32: ......
