8
MOUNTING THE KSM UNIT
:
Using the dimensions shown below, use four (4) ¼” bolts, nuts & lock washers (not
supplied) to mount the KSM unit to vehicle or equipment chassis
.
When selecting a location for installation, make sure that the KSM module and
cables will clear any hoods, lids, covers and other movable vehicle or equipment
parts. Install the KSM module as close to the engine's cranking motor as possible.
Avoid locations that are subject to extreme heat, humidity, road dirt, ice and snow.
The KSM unit may be mounted in any position. Take care to prevent the external
case of the KSM module from receiving any physical impacts.
CAUTION
6 cell KSM
The J1939 connector is used for KBI Factory programing only. Contact KBI for details
.
Summary of Contents for KSM PLC
Page 18: ...18...
