13
1
2
WARNING
To Secure All Acceptable Infant Car Seats
With one hand, grasp the Infant Car Seat
handle (in its upright, carrying position).
With your other hand, grasp Infant Car
Seat near baby’s feet. Gently position the
Infant Car Seat above
Infant Car Seat
Adapter
so the baby faces the stroller
handle.
Lower the Infant Car Seat between
the front & rear bars. Remove restraint
buckles from bag.
For a secure fit, wrap restraint straps
through Infant Car Seat belt slots and
buckle. Tighten Restraint Straps.
Special
Instructions
for Car Seats without belt
slots: Secure Infant Car Seat to
Adapter
by wrapping restraint over seats lowest
center point near handle and buckle them
together. Tighten Restraint Straps.
NOTE: Shopping cart lever will not lock
onto the carrier. To secure infant car seat
to carrier, use restraint straps.
3
When using this product, to avoid seri-
ous injury from falling or sliding out,
infant must always be secured in the
Infant Car Seat with the Car Seat har-
ness. Refer to Infant Car Seat
Instructions for proper adjustment.
1 & 2
3
Belt Slots
3
Black
Bumpers
Front Bar
Restraint Bag
Side Rail
Slot
2
To Install and Use Infant Car Seat Adapter
1
To remove seat, push in release levers
located underneath handles and lift up.
Align Infant Car Seat Adapter as shown
with the black bumpers toward the back
of the frame.
Push adapter into side rail slots until a
click is heard on both sides. Pull up on
adapter to make sure it is secured to the
frame.
2
3
Restraint Bag
Lowest Center Point
