Atollspeed Touch Screen Series
– Original Instructions
This document is property of Kolb Huizhou Ltd.
16
Eggs in their shell and whole hard-boiled eggs should not be heated in ovens since they
may explode even after microwave heating has ended.
When preparing frozen food defrost with 0% microwave power to avoid damage to
the device.
WARNING:
Concerning possible slippery floor adjacent to the appliance
On airborne noise emissions, the A-weighted sound pressure level is below 70 dB(A).
WARNING:
Appliances must be disconnected from their power supply during cleaning or
maintenance and when replacing parts.
The oven should be cleaned regularly and any food deposits removed;
Failure to maintain the oven in a clean condition could lead to deterioration of the surface.
That could adversely affect the life of the appliance and possibly result in a hazardous
situation.
4. Oven Installation
1)
Remove packing material from the oven and put the material in the wastage bin or recycle.
2)
The oven has to be set up on an even and flat surface and may not be exposed to any
vibration. Two or more people are required to lift the oven. Don’t lift the oven at the door
handle or the door. The surface place must be able to hold the weight of at least
150kg
.
3)
Open the cooking chamber door and take out all the material inside the oven chamber.
Thereafter remove the protection film from all the parts before starting the first heating up
process. The chamber must be clean before using the oven.
4)
Check the oven for visual damage. If you find any damaged parts, inform the installation
engineer or the agent.
5)
The marking of warning sign against danger of scalding has to be mounted after installation
at a height of 1,60 m above the floor.
4.1 Electric connection
Please note that all adjustments to the Atollspeed (connections, repairs
maintenance work etc.) should be carried out only by licensed specialists
who are familiar with the valid and local general regulation.
The electric connection cable must be flexible. It must be in loops so that the
baking oven can also be relocated even when it must be moved forward for
the installation or rear side for inspection reasons.
Warning sign against danger of scalding
(Minimum height: 30 mm)