Kokido Racer Wizz RC30, User Manual

Page: 16 / 44

15
TROUBLESHOOTING
Problem Possible Cause Solution
Battery is running out Charge the robot again.
Impeller is jammed Power off the robot and visually check the hole under the
swivel head to see if the impeller is jammed by larger
debris. If necessary, contact your dealer for further
instructions.
WARNING!
Make sure the robot is powered off
when the unit is being serviced.
Impeller is broken Contact your dealer for replacement.
Robot does not capture the debris
Debris compartment is full Clean both debris compartment and filter cover.
Robot stopped by obstacle Check to see that if there is nothing obstructing the
cleaner. Remove the obstacle. Robot stopped moving in the middle of
pool but swivel head is still turning
Robot is stopped by suction
force from pool floor main drain Turn off the filtration system as instructed in manual.
Debris compartment is full Clean the debris cleaner
Operation time is shorter as
expected Clean the filter compartment and recharge the robot
again for 4.5- 5 hrs
Moving direction is interrupted
by water circulation generated
by filtration system Turn off the filtration system as instructed in manual.
Wheel is jammed Check and clean out debris from the wheel.
Locking pin position is not
correct / bumper is required Follow instruction to set up the locking pin position
properly and apply bumper .
Robot does not cover the entire pool /
move along the pool wall
Robot moves along the pool
wall of round pool Make sure the bumpers have been installed as instructed
in manual.
Robot trapped in the narrow place of
the in-ground pool No enough space for robot
turning in other direction Follow instruction to put bumper on both end of robot.
Robot moves slowly Debris compartment is full Clean both debris compartment and filter cover.
Swivel head does not turn or turn
noticeably slowly Swivel head bottom is jammed Check and remove any debris that may be trapped under
the swivel head.
Side flap is jammed Check and remove any debris that hinders the
movement of the flap.
Swivel smoothing- ring is
broken Replace with a new swivel smoothing-ring. Contact your
dealer for replacement parts.
Debris escapes from the robot Suction mouth’s flap (on Suction mouth’s flap works like a door to prevent the