![background image](http://html1.mh-extra.com/html/koken/lm-084/lm-084_instruction-manual_1990283011.webp)
10
② "Heart Rate" is displayed on the LCD display. Enter the heart rate (see page 11: “Case data”)
and press the "E" key.
* If a value outside the settable range is entered, the output will not be correct.
③ When the liquid crystal display shows “L-Breath Sound” input a case number of breathing
sounds for the left lung and then press the “E” key. (refer page 11 of this manual)
④ When the liquid crystal display shows “R-Breath Sound No,” input a case number of breathing
sound for the right lung and then press the “E” key.
(refer page 11 of this manual)
⑤ The liquid crystal display shows
“H NO □ HR □
L-B □ R-B □
ST”
and then a case sound you set is outputted. Each case sound volume can be adjusted,
corresponding to the volume switch of each region.
* When turn up the volume too much, the sound may be distorted.
* When the speaker sound of other parts interfere while auscultation,
please turn down the volume.
Each case sound chosen by the select switch can be heard from the speaker outside.
⑥ When you finish or output other cases, press the “R” key.
⑦ When you finish, turn off the power switch.
○ Cautions for the speaker volume