PNC-12 EXTREME
11
1 Transverse driving motor
6 Solenoid valve unit
2 Longitudinal guide rail unit
7 Motorized up/down device
3 Gas supply inlet
8 Oxy-fuel torch unit
4 Control
system
9 Longitudinal
driving
motor
5 Main body unit
10 Cross bar unit
2.4 CROSS BAR TYPES AND SPECIFICATION
Effective cutting 1000L: full length of 1900mm
Effective cutting 1250L: full length of 2110mm
Effective cutting 1500L: full length of 2400mm
2.5 LONGITUDINAL RAIL TYPES AND SPECIFICATION
Effective cutting 1500L: full length of 2050mm
Effective cutting 2500L: full length of 3090mm
Effective cutting 3000L: full length of 3540mm
3 MACHINE INSTALLATION
3.1 OVERVIEW
In order to make sure the machine can be smoothly moved and operated, the machine must be placed
on a steel plate that is held steady without wobbling or the machine must be fixed. Meanwhile, it is
required to avoid placing the machine in the open air to assure its cutting quality and operating
performance.
3.2 MACHINE INSTALLATION
After receiving the Potable CNC cutting machine, the user shall count the article according to the packing
list and place it in a reliable position (note: Please keep USB memory for installing PNC-CAM (or
KAP-Jr.) safely). The machine is dismantled partially and is packed. After the equipment arrives at the
user’s site, the user is required to assemble those equipment by user itself. The assembly process is
shown as follows: