5. Install the Rollers to the Moving Panels
Assemble two rollers on each moving panel with #8-32 x 3/8
″
roller screws.
Ensure the steel side of the roller is against the top frame flange.
6. Install the Plastic Clips
Insert a plastic clip into each panel guide slot of the bottom frame of the moving panel.
Verify the plastic clips are completely pushed all the way down into each slot.
Repeat this procedure for the other moving panel.
Steel Side of Roller against
Top Frame Flange
Moving Panel
#8-32 x 3/8"
Roller Screw
Plastic
Clip
Bottom
Frame
Panel
Guide Slot
Sterling
7
1034049-2-E
