2. Install the Faucet
Install the Spout
Insert the large O-ring into the larger groove of the washer.
Insert the small O-ring into the smaller groove of the washer.
From above the deck/rim:
With the large O-ring in the washer
facing down, place the washer over the mounting hole. Insert the
supply tube assembly through washer.
From underneath the deck/rim:
Slide the plate onto the supply
tube assembly until it is flush with the underside of the
deck/rim, then secure with the screws. Slide the flat washer onto
the supply tube assembly, then secure with the nut.
Verify that the setscrew does not protrude past the inside wall of
the spout. Partially unthread the screw from the spout if needed.
Place the spout over the supply tube.
Secure the spout with a setscrew. Cover the setscrew with a plug
button.
Install the Remote Valve
Plug Button
Plate
Nut
Setscrew
Grooved Washer
Washer
Nut
Screw
Plate
Small O-Ring
Large O-Ring
Gasket
Supply Tube
Kohler Co.
5
1110057-2-B