-18-
Cover,Top
Cover,Front
B. Methods two and three: During remote installation, fix
the cover onto the tank and pull the air hose to the
panel. Reserve access panel at front or top to ensure
removal and installation of cover.
Method two: During remote plate installation,
7~20mm thickness is recommended for the wall of
the pinch plate and at least 80mm gap is reserved.
Method three: During remote installation of mask, 4
holes with diameter of 10mm and depth of 16mm are
needed to be reserved at the locating hose. Drill
10mm holes through air hose on the side of the mask.
Recommended installation hole size of
X
mm to remote plate installation.
297
157
B.
7~20mm
80mm
4
10mm
16mm
10mm
X
mm
297
157
At least 80mm gap reserved
80mm
Air hose
Pinch plate
Finished wall
Supporting
Board
Air hose
Finished
wall
72
7~20mm recommended
7~20mm
10 Hole through hose
10
10 Depth 16,
Space reserved
10
16
297
157
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
Pinch plate installation
Screw
Air hose
Pinch plate
Pinch plate
Finished wall
Faceplate
Supporting Board
C. Method four: Cut apart the cable of the air hose. Pull
it out from the front of the tank and meanwhile
reserve the access panel. Fix the four plates with
screws and then fix the support board.
No direct contact between the faceplate and the
tank.
7~20mm thickness recommended for the wall of
the pinch plate.
Note:
Recommended installation hole size of
X
mm to remote plate installation.
297
157
C.
7~20mm
X
mm
297
157
Method four:
Press from front
Air hose
Pinch plate
Finished wall
7~20mm recommended
7~20mm
At least 80mm gap reserved
80mm
At least
80mm gap
reserved
80mm
+2
0
+2
0
+2
0
+2
0
1288818-T01-B
Summary of Contents for REVE K-14042T-L
Page 36: ...A B A B 24 1288818 T01 B ...