- 70 -
Workshop Manual KD 441_cod. 1.5302.865_2
nd
ed_ rev.
01.
9
172
173
171
12V, 17A electric ignition diagram
Components:
1
Alternator
2
Starter motor
3
Voltage regulator
4
Battery
5
Oil pressure switch
6
Oil pressure light
7
Key switch
8
Battery charging light
9
Capacity bank
10
Push button switch
Note
: The battery, which is not supplied, should have 12V nominal
voltage rating and a capacity of not less than 44 Ah / 210
Amp. of fast discharge intensity.
Alternator charger graph (12V, 17A)
This test has been carried out after thermal stabilization at 20°C for
2 minutes at 3000 r.p.m. with constant battery voltage of 12.5V.
The value of the power supplied with reference to the curve may
change in a range b10% and -5%.
Alternator
Components:
1
Ring gear
2
Flywheel
3
Rotor
4
Stator
The stator fixing screws must be tightened to 1.2 Nm.
Note:
The rotor is made up by a plastoferrite ring which is fixed to
flywheel while the stator is mounted on the crankcase.
ELECTRICAL SYSTEM
Summary of Contents for RD 441
