- 64 -
Workshop Manual KD 441_cod. 1.5302.865_2
nd
ed_ rev.
01.
8
156
155
154
F
10
G
10
F
G
Fuel system
Injection pump fitting in the crankcase
Fit pad
2
into the tappet so that recess
B
points downwards as shown
in the figure.
(For pad spacer, see fig. 165)
Fit the injection pump into the crankcase complete with gasket po-
sitioning flow control
1
in the fork of lever
5
which should be in the
maximum flow position.
Caution – Warning
When removing the injection pump from its housing make sure
that spacer 2 is not dropped into the oil sump; injection pump
operation will be hampered if the spacer is not installed.
Injection pump
This is of the simplified QLC type; it is housed in the crankcase and is
controlled by the camshaft via tappets.
Solenoid valve
Dimensions (mm)
Characteristics:
12 V 0.9 A.
Summary of Contents for RD 441
