- 43 -
Workshop Manual KD 441_cod. 1.5302.865_2
nd
ed_ rev.
01.
88
2a
91
90
1
3
H
J
89
1
H
H
3
1
2
5
J
K
Overhauls and checking
Oil seal ring on crankcase - Reassembly
After lubricating the oil seal ring
2a
(see detail), place it on the bea-
ring making sure its internal channel (see figure on the side) is facing
downwards.
Operate the press and drive the oil seal ring in until tool
J
reaches its
stop.
Gearbox extension, bearing and oil seal replacement
Legend
1
Gearbox extension
2
Gearbox extension oil seal rings
3
Roller bearing
J
Oil seal pressing tool flyweel side p/n 1460-328
K
Oil seal pressing tool PTO side (gearbox extension) p/n 1460-346
H
Roller bearing assembly/disassembly and PTO side oil seal pres
sing tool (gearbox extension) p/n 1460-347.
Roller bearing - Disassembly
Important
Firmly place gearbox extension 1 on the press.
Place bearing assembly tool
H
on the bearing.
Operate the press to remove the roller bearing and the oil seal ring.
Roller bearing - Reassembly
Caution – Warning
Thoroughly wash the gearbox extension and the roller bearing.
Important
Firmly place gearbox extension 1 on the press.
Place roller bearing
3
on the gearbox extension opening.
Place bearing assembly tool
H
on roller bearing
3
.
Operate the press to assemble the roller bearing.
Summary of Contents for RD 441
