6
C.
2mm
C. Finish Bath Area Construction
NOTE:
An access panel is essential for future
maintenance.
Possible framing arrangements are illustrated below.
Use the framing construction appropriate for your
particular bath model. Some modifications may be
needed for other types of construction, if preferred.
If an apron wall without a ledge is desired, the finished
apron wall surface must be 2 mm under the bath rim.
1). Corner Installation
The suggested framing construction is illustrated.
1).
2). Recess Installation
The suggested framing construction is illustrated.
2).
Recommended For Drop-in Models
3). Peninsular Installation
The suggested framing construction is illustrated.
3).
Finished Wall
Wall
Framing
Construction
Service Access
Finished Wall
Wall
Framing
Construction
Service Access
Finished Wall
Wall
Framing
Construction
Service Access
116867-T01-B
