14
1493623-W2-A
5
6
7
8
L
N
Loosen the screws in the terminal block and insert the wires.
Inlet
Connector
Olive
Compression
Nut
Inlet Supply
Pipe
Connect the inlet supply pipe to the inlet connector using the
compression nut and olive (supplied).
Always provide mechanical support when making plumbing
connections.
Upon completion of the installation ensure connections and back
case are not under any stress due to misaligned pipework or
electrical cables.
Strip back sufficient outer cable insulation to enable routing to
terminal block.
Fit an earth sleeve to the earth wire.
Tighten the screws in the terminal block, ensure the wires are
secure and tight.
N
(Neutral) = Blue Wire
L
(Live) = Brown Wire
(Protective Earth) =
Green /Yellow Sleeved Wire
Turn on the water supply and check for leaks.
Tighten the three cover screws.
Screws
Cover
Spindles
Service Tunnel
Screw
Ensure the earth bonding complies with relevant regulations.
Replace the service tunnel.
Ensure the control dials are aligned with the spindles and replace
the cover.
Summary of Contents for Mira Sport J03A
Page 26: ...26 1493623 W2 A Notes...
Page 27: ...27 1493623 W2 A Notes...
