Kohler Mira Pixel, User Manual

Page: 26 / 32

26
Over Temperature at Control Sensor
1. Turn Digital Mixer off for 10 seconds. Turn back on and allow
15 seconds to reset.
2. If shower operation does not return to normal, make sure hot
and cold inlets are not reversed.
3. If shower operation does not return to normal, make sure inlet
filters and check valve cartridges are clean.
4. If shower operation does not return to normal, check the
water supplies to the valve are within the correct temperature
and pressure ranges. See “
Mira Pixel Installation Guide -
Specifications
”.
5. If problem still occurs, make a note of the error code and
contact our Customer Services Team.
Control Sensor
1. Turn Digital Mixer off for 15 seconds. Turn back on and allow
15 seconds to reset.
2. If shower operation does not return to normal, replace
Thermistor. (To be performed by competent tradesperson
only!)
3. If problem still occurs, make a note of the error code and
contact our Customer Services Team.
Control Sensor or PCB Relay
1. Turn Digital Mixer off for 15 seconds. Turn back on and allow
15 seconds to reset.
2. If shower operation does not return to normal, replace
Thermistor. (To be performed by competent tradesperson
only!)
3. If shower operation does not return to normal, replace PCB.
(To be performed by competent tradesperson only!)
4. If problem still occurs, make a note of the error code and
contact our Customer Services Team.
Error Codes
A specific problem relating to the electronic function of the shower will result in an
error code being displayed on the control.
FAULT DIAGNOSIS