25
Press button to release and remove
the controller from the wall.
Make sure the controller is dry
before removing the battery cover.
Turn unit over to remove the battery
cover by loosening the 4 screws
with a pozi-drive screwdriver.
Note!
The screws remain attached
to the battery lid.
When refitting the battery cover,
make sure the blue seal is clean
of dirt and debris. Make sure the
cover is secured firmly, but do not
overtighten the screws.
Remove and replace all batteries.
Only use batteries of same make
and type. Do not use rechargeable
batteries.
Change the batteries when the low battery
symbol is displayed.
To access the batteries, the controller must
be removed from the wall.
REPLACING THE BATTERIES
Hook controller on top of bracket
and push firmly until controller
“clicks” back into place.
If necessary, test shower to see if
functions are working as expected.
Summary of Contents for Mira Pixel
