15
1493936-W2-A
Clamp
Bracket
Soap
Dish
Slide Bar
Showerhead
Screws
Cover
Spindle
Service Tunnel
Screw
16
17
18
19
20
21
POWER
TEMPERATURE
MAX
AIRBOOST
LOW
ECO
HIGH
To enable the Airboost function
the shower hose must now
be fitted correctly. Follow the
instructions in the separate guide
(Mira Sport Shower Fittings) to
install the shower fittings.
Ensure the earth bonding
complies with relevant
regulations.
Replace the service tunnel.
Plug the multi-connector into the
cover PCB socket
Note:
The
multi-connector will only locate
correctly into the socket in one
direction.
Ensure the temperature control
dial is aligned with the spindle
then replace the cover.
Tighten the three cover screws.
Do not
use alternative screws
to secure the cover. This can
cause internal damage to the
appliance.
Do not
seal around the back of
appliance.
Multi-
Connector
