background image

8

39

_04

INFORMATION ABOUT WARRANTY

EN

Parts/components that are scheduled to be replaced as part of the required maintenance schedule will be covered under   

the warranty provisions for a period of time up to the first scheduled replacement point for the subject parts/ components. 

Subsequent damage to other engine components as a direct result of a warrantable failure an exhaust emission part/ component 

will be covered under the warranty provisions described herein.

6. MAINTENANCE AND REPAIR REQUIREMENTS

The owner is responsible for the proper use and maintenance of the engine. Kohler Co. recommends that all receipts and 

records covering the performance of regular maintenance be retained in case questions arise. If the engine is resold during the 

warranty period, the maintenance records should be transferred to each subsequent owner. Kohler Co. may not deny warranty 

repairs solely because of the lack of repair, maintenance or failure to keep maintenance records.

Normal maintenance, replacement or repair of emission control devices and systems may be performed by any repair 
establishment or individual; however, warranty repairs must be performed by a Kohler authorized service center. 

7. CALIFORNIA AND FEDERAL EMISSION CONTROLWARRANTY STATEMENT, OFF-ROAD & MARINE DIESEL 

ENGINES (USA ONLY)

The California Air Resources Board (CARB), U.S. environmental protection agency (EPA), and Kohler Co. are pleased to 

explain the emission control system warranty on your [current model year – {2+ current model year}] off-road compression 

ignition and marine (diesel) engine. In California (“the state”) and US EPA regulated region, new heavy-duty off-road & marine 

engines must be designed, built and equipped to meet the state’s and US EPA anti-smog standards. The warranty period 

shall begin on the date the engine or equipment is delivered to an ultimate purchaser. Kohler Co. must warrant the emission 

control system on your engine for the periods of time listed in the section below, provided there has been no abuse, neglect 

or improper maintenance of your engine.

Your emission control system may include parts such as the fuel injection system and the air-induction system. Also included 

maybe hoses, belts, connectors and other emission related assemblies. 

When a warrantable condition exists, Kohler Co. will repair your heavy-duty off-road & marine engine at no cost to you including 

diagnosis, parts and labor. 

The owner shall not be charged for diagnostic labor that leads to the determination that a warranted part is in fact defective, 

provided that such diagnostic work is performed at a warranty station.

MANUFACTURER’S WARRANTY COVERAGE:

The [current model year – {2+ current model year}] heavy-duty off-road & marine engines are warranted for the periods listed 
below. If any emission-related part on your engine is defective, the part will be repaired or replaced by Kohler Co. 

MARINE DIESEL ENGINE

VARIABLE SPEED OR 

CONSTANT SPEED

KW <19

ANY SPEED

1,500 HOURS OR TWO 

YEARS, WHICHEVER 

COMES FIRST.

Constant speed

19 ≤kW <37

3,000 rpm or higher

1,500 hours or two years, 
whichever comes first.

Constant speed

19 ≤kW <37

Less than 3,000 rpm

3,000 hours or five years, 
whichever comes first.

Variable speed

19 ≤kW <37

Any speed

3,000 hours or five years, 
whichever comes first.

Variable speed or constant 
speed

kW ≥37

Any speed

3,000 hours or five years, 
whichever comes first.

ENGINE POWER 

WARRANTY PERIOD

kW < 19  

1,500 hours or 2,5 years, whichever comes first.

19 ≤ kW < 37

2,500 hours or 3,5 years, whichever comes first.

37 ≤ kW < 75

5,000 hours or 5 years, whichever comes first.

ED0053030870

Summary of Contents for LOMBARDINI MARINE KDI 1903M-MP

















































Reviews: