Kohler KDI-1903TCR, Owner'S Manual

Page: 24 / 40

4
24
Fig. 4.6
D
B
B
D
A
A
Fig. 4.7
B
E
D
C
D
C
Fig. 4.8
INFORMATION ABOUT MAINTENANCE
EN
4.6 Check of the radiator heat-exchanger surface
NOTE:
Component not necessarily supplied by
KOHLER
.
Important
• Wear safety goggles when using compressed air.
• The radiator heat-exchange surface must be cleaned on
both sides.
1 - Check the radiator heat-exchange surface D .
2 - Clean the surface with a brush soaked in special detergent
if it is clogged.
4.7 Rubber hoses check
The check is carried out by exerting a slight deflection or
bending along the pipe and near the hose clamps.
Components must be replaced if they have clear signs of
cracks, tears, cuts, leaks and do not retain a certain degree
of elasticity.
Important
• If hoses are damaged contact an authorized KOHLER
workshop.
Danger
For safety precautions see Cap. 2.
1 - Check that the:
- Fuel system hoses A are intact.
- Cooling circuit hoses B .
- Vent system pipes C .
- Air system ducts D .
- Oil return circuit hose E .
UM KDI 1903TCR_2504TCR _ cod. ED0053029490 -
2° ed
_rev.
01
Index