Kohler KARING 2.0 K-77780T-0, Installation Manual

Page: 48 / 73

Fig.#18
L. Install the Vitreous Shell
M. Connect the Wiring flexible hose of bidet seat to Tee Connector
WARNING: Risk of personal injury.
The vitreous shell weighs 35 kg.
Use proper lifting technique when handling the vitreous shell.
Fig.#17
CAUTION: Risk of product damage. Do not set the shelldown hard.
Gently lift and move the shell if it is not placed correctly. If handled
harshly,the shell may chip or break.
WARNING: Risk of personal injury.
Make sure the plug (if plug-in connection is used) and receptacle are
dry. If any moisture is present, allow the area to dry before plugging the unit in.
Carefully pick up the vitreous shell and place it over the tank.
Make sure the trapway seats fully in the outlet gasket. If the vitreous
shell does not sit evenly on the floor, the trapway is not properly
seated.
Make all adjustments gently until the trapway is properly seated.
If plug-in connection is desired, plug the pump in.
Connect replenish water hose and discharge pipe.
Connect the wiring harness.
Connect the level switch.
Plug the bidet seat in.
Vitreous
Tank
Collar
Wiring Harness (Bidet Seat)
Flexible Hose of Bidet Seat
Tee Connector
1250881-T01-A 48 Kohler Co.
Level Switch
Water replenishment
pipe (blue)
Discharge pipe
Wiring Harness (Pump)