Front Housing Assembly
Align the large hex end of the showerhead tool with the flats of
the hex nut on the showerhead assembly. Turn the tool
counterclockwise to remove the hex nut from the showerhead.
Using a thin-blade screwdriver, remove the plastic thrust washer
from the front housing assembly.
Using a thin-blade screwdriver, remove the diffuser from the front
housing assembly.
Clean the diffuser by flexing it to break loose mineral deposits.
Place the diffuser, with the small end of the groove facing out,
into the front housing assembly. Reinstall the thrust washer and
hex nut. Reinstall the aerator assembly. Reinstall the handshower
on the shower hose.
Test the showerhead for proper function and smooth operation.
Troubleshooting
Troubleshooting Table
Symptom
Probable Cause
Corrective Action
Low flow or poor
performance.
Clogged inlet screen.
Inspect and clean or
replace screen in
handle assembly.
Diffuser
Thrust
Washer
Kohler Co.
5
113747-5-A
Summary of Contents for K-9677
Page 27: ...113747 5 A ...
