Install New Trip Lever
Remove the tank cover from the toilet.
Disconnect the flapper ball chain from the existing trip arm.
Remove the locknut by turning it clockwise.
Remove the existing trip lever assembly from the tank.
Insert the trip arm of the replacement trip lever into the toilet
tank hole.
Secure the trip lever assembly with the washer (if supplied) and
locknut. Remember that the locknut has left-hand threads. Do not
overtighten the locknut, or the trip lever will not move freely.
If the assembly binds, loosen the locknut slightly until free
movement is achieved.
Hook the flapper ball chain to the hole in the trip arm. Check for
proper chain length and adjust as needed.
Check assembly for smooth operation and flush actuation. Trip
arm movement should be free of interference. The trip lever
should be horizontal when at rest.
Replace the tank cover.
Trip
Lever
Flapper
Ball Chain
Locknut
Trip Arm
Kohler Co.
3
106228-2-AB
