Kohler K-706139, Installation And Care Manual

Page: 14 / 52

11. Adjust the Door
Open and close the door panel and check for smooth operation and correct alignment.
If the door catch needs adjustment, adjust the door catch in or out by turning the setscrew with the
supplied 2 mm hex wrench.
If the door panel contacts the base or is out of alignment, adjustment is required.
Remove the cover.
To make adjustments, loosen the locking screw and turn the adjustment screw to adjust the door as
needed with the supplied 3 mm hex wrench.
Check for smooth operation and alignment.
Repeat until final adjustment has been reached.
Tighten the locking screw.
Reinstall the cover.
2 mm
3 mm
Locking
Screw
Adjustment
Screw
1280798-2-B 14 Kohler Co.