Standby mode
1..
Press POWER button on side panel, enter standby mode when generate one “beep”. Meanwhile, auto detection
and remote function OFF, seat heating function deactivated to minimize energy consumption.
2..
When press POWER button on side panel again, exit standby mode and all function recovered.
Press Dryer key to activate the dryer function..
Press it again to deactivate.
Press this key to enter the mode of Rear.
Press it again to deactivate.
Light sensing area
power
Auxiliary keyboard function
UV sterilization function
*
Press this key to enter the mode of Front.
Press it again to deactivate.
Press the button to turn off the
night light function (long pip hint)
Press it again to activate the
function of night light (short pip
hint)
Press the button to turn off the
power (long pip hint)
Press it again to turn on the
power (short pip hint)
UV function sterilizes the effuser with ultraviolet ray. UV function can be activated only under non-seating status.
Automatic UV sterilization
If the product is not used for a long time, the function of UV sterilization will be activated automatically.
By this way, the effuser will then be sterilized. The function will not be activated again for another 24 hours.
If during UV sterilization a user is sitting on the seat, or the stop key on the remote control is pressed,
UV sterilization deactivate.
For setting of automatic UV function, see page 9.
Manual UV sterilization
If the cover is close, short press the UV key on remote control to execute the function of UV sterilization immediately.
If during UV sterilization a user is sitting on the seat, or the stop key on the remote control is pressed, UV
sterilization deactivate.
Press it to flush the toilet(press
and hold the key after power is off
to activate emergency flush
function)
* UV sterilization (refers to the ultraviolet sterilization generated by UV lamp): During UV working cycle, the bacteria on nozzle surface will be eliminated by irradiation. The antibacterial
rate is more than 99%. (Measured after one UV working cycle, it was measured within 18mm×8mm irradiation area. Perform test in accordance with GB /T 23131 requirements, UV
radiation zone was shown in the diagram, UV working cycle activation mode refers to users guide. Testing lab: China household electrical appliances testing institute.)
UV radiation range
Notes:
Bidet nozzle
1. Each function shall operate per factory setting.
2. Under the mode of Front or Rear wash, press it again to deactivate this function. Otherwise, it will stop automatically after 5 minutes.
3. Under the Dryer mode, press it again to deactivate this function. Otherwise, it will stop automatically after 4 minutes.
Kohler Co.
15
1413476-TW01-A
