ÉÉ
ÉÉÉ
Flush Valve
Gasket
Bottom of Tank
Nut
Fig. #10
3.
Refer to Fig. #11.
Insert threaded rod from under
neath tank, through flush valve.
Make sure the two
engagement pins are securely clipped in the
valve slots as shown.
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
ÍÍ
Threaded Rod
Valve Body
Engagement
Pin
Fig. #11
4. Insert actuator rod into threaded rod.
5.
Refer to Fig. #12.
Position tank lid in place. Draw a
line on the rod 1/16" (2 mm) above the lid. Cut rod at
this mark.
Remove the tank lid before cutting the
rod.
ÍÍ
ÍÍ
ÍÍÍ
ÍÍÍ
Tank Lid
Threaded Rod
2mm
Actuator Rod
6.
Refer to Fig. #13.
Put lid on tank. Reinsert rubber
washers, brass washers, and brass screws inside the
tank. Assemble brass washers and nuts to screws un
derneath tank.
CAUTION: DO NOT OVERTIGHTEN.
BREAKAGE/CHIPPING MAY RESULT.
ÍÍÍ
ÇÇ
ÇÇ
ÇÇ
ÇÇ
ÇÇ
ÍÍÍ
ÇÇÇ
ÇÇÇ
ÇÇÇ
ÇÇÇ
ÇÇÇ
Threaded Rod
Tank Lid
Actuator
Actuator Rod
Fig. #12
Fig. #13
7. Screw actuator into place.
8. Turn water supply to toilet on. Flush toilet.
SERVICING THE ACTUATOR ROD KIT
1. Shut off water supply to toilet. Flush toilet.
2.
Refer to Fig. #14.
Unscrew actuator from top of tank
and remove tank lid.
Fig. #14
ÍÍÍ
ÍÍÍ
ÇÇ
ÇÇ
ÇÇ
ÇÇ
ÇÇ
ÍÍÍ
ÍÍÍ
ÇÇÇ
ÇÇÇ
ÇÇÇ
ÇÇÇ
ÇÇÇ
Threaded Rod
Tank Lid
Actuator
Actuator Rod
3. Inset new rod into threaded rod.
4. Position tank lid in place.
5.
Refer to Fig. #15.
Draw a line on the rod (1/16") above
the lid. Cut rod at this mark.
Remove tank lid before
cutting rod.
6. Put lid back into position and screw actuator into place.
7. Turn water supply to toilet back on. Flush toilet.
