4. Shower Only Installations
NOTE:
Shower only installation require 2-valve yokes.
NOTE:
Typical dimensions for bath and shower installations are
shown on the rough-in diagram.
NOTE:
Refer to the trim installations for specific requirements.
NOTE:
Refer to the handle installation instructions for possible
rough-in depth requirements.
Unless otherwise instructed, rough-in the supply yoke 2-1/4
″
(5.7
cm) minimum to 3
″
(7.6 cm) maximum from the centerline of the
yoke to the outside of the finished wall.
Install 1/2
″
hot and cold supply tubing.
If specified, install the screwdriver stop valves.
Using a 3/8
″
hex wrench, remove the aspirator from the yoke and
discard.
Install a plug in the spout piping opening.
Plug
72"
(182.9 cm)
To Floor
24"
(61 cm)
113212-2-AC
6
Kohler Co.
Summary of Contents for K-302
Page 22: ...113212 2 AC ...
Page 23: ...113212 2 AC ...
