2. Self-Rimming Installation – Install the Lavatory
CAUTION: Risk of personal injury or product damage.
Cast
iron lavatories are very heavy. Get help lifting the lavatory into
place.
Temporarily position the lavatory in the countertop cutout so the
″
Kohler
″
logo is to the back. Verify proper fit and clearance.
Remove the lavatory from the countertop.
Install the faucet and drain according to the manufacturer’s
instructions.
NOTE:
For installations using tile, wood, or other porous materials,
apply waterproof sealer around the cutout area of the countertop
surface. Allow the sealer to dry before proceeding.
Carefully position the lavatory in the countertop cutout so the
″
Kohler
″
logo is to the back. Verify proper fit and clearance.
Apply a thin, continuous bead of sealant around the lavatory
edges.
Immediately
wipe away any excess sealant.
Fill any voids between the lavatory and the cutout with sealant.
Verify that the lavatory had not moved out of position.
Allow the sealant to cure for at least 30 minutes before
proceeding.
Sealant
Seal along the edge of lavatory.
1061941-2-B
6
Kohler Co.
Summary of Contents for K-2829
Page 27: ...1061941 2 B...
