-4-
For vertical drainage installations: assemble parts as
shown. Align the parts with the drain base. Align and
tighten the nuts.
Fig.#11
11
Fig.#12
12
Fig.#13
13
Fig.#14
14
Fig.#15
15
Assemble the overflow plate kit and the base kit back to
the overflow base from the inside of bath tub.
Fig.#10
10
For horizontal drainage installations: assemble parts as
shown. Align the parts with the drain base. Align and
tighten the nuts.
Insert the control wire into the center of the overflow
hole.
After inserting the whole control wire, insert the rib on
the button into the slot on the button base until a "click"
is heard.
Pull the tail of control wire from the drain hole.
Pull Out
1260047-T01-B
