2. Prepare the Site
NOTE:
Allow for a 1/4
″
(6 mm) overlap for the lip of the wall sleeve and a minimum clearance of 1/2
″
(1.3 cm) around the back of the opening to enable the clips to fully engage.
Refer to the rough-in information. With a pencil, mark the cut lines onto the finished wall.
Carefully cut out the opening in the finished wall following the penciled guidelines.
For thin finished wall materials of less than 3/16
″
(5 mm), shim around the back of the opening to
provide adequate support for mounting the interface wall sleeve.
1/4" (6 mm)
Interface Lip
Cutout
Wall
Shim
Clamp Arm
7-11/16"
(19.5 cm)
3-11/16"
(9.4 cm)
1/2" (1.3 cm) Min
Clamp Arm
Clearance
3/16" (5 mm) Min –
2" (5.1 cm) Max Depth
Digital Interface
Shim thin walls if necessary.
34"
(86.4 cm)
10"
(25.4 cm)
Kohler Co.
7
1093343-2-B