-9-
3) Replace the spring and sleeve into the jet body.
3)
4) Re-assemble the two halves of the eyeball and fit
into the sleeve. Note that the 6 legs on the eyeball fit
between the castleations on the sleeve. Fit the washer
over the stalk on the front of the eyeball.
4)
5) Holding the eyeball in place, gently push the facia
back into the jet body until it clicks into place.
5)
6) To open or close the jet control, rotate the central
stalk. There is no solid stop on the control and it can
therefore be rotated clockwise or anticlockwise from the
ON position through OFF and back to ON.
6)
Both handles open with turning counter-clockwise and
close with turning clockwise. Turn on the faucet, water
flows from the bath spout. Pull diverter, water flows
form the handspray. When turn off the faucet, the
diverter returns to the bath postion.
OWNER S INSTRUCTIONS: FAUCET SECTION
’
1073414-T01-B
