-8-
3) Pull the sleeve and spring out of the jet body. Note
the sleeve may be jammed in place by debris and long
nosed pliers may be needed to remove it.
3)
4) Slide the spring off the sleeve.
4)
Jet Body
Sleeve
5) Clean out any hair or grime from inside the jet body.
5)
6) Clean off any hair or grime from the sleeve, spring,
eyeball, washer and facia with a clean cloth.
6)
B. TO RE-ASSEMBLE
1) Exploded diagram of components.
1)
B.
Jet Body
Spring
Sleeve
Eyeball
Washer
Facia
2) Check the spring length is 22mm, gently stretch the
spring if necessary. Re-assemble the spring over the
sleeve.
2)
22mm
22mm
1073414-T01-B
