8. Troubleshooting
The faucet works properly if the following conditions occur during
the first 10 minutes after power up:
NOTE:
To see the sensors you must remove the cover of the control
box.
The GREEN LED is on constantly and the faucet is running when
the faucet sensor sees an object.
If the faucet senses an object for more than 30 seconds, the faucet
stops flushing and the GREEN LED flashes until the object has
been removed.
If the faucet does not turn on:
Check the batteries for a charge and proper installation. Replace if
necessary.
Make sure the battery pack lead wires and the faucet are plugged
into the circuit board.
Check that the supply lines are open.
Circuit
Board
Electrical
Tubing
Faucet Lead
Connection
Straight Connector
Green LED
Red LED
1031173-2-B
10
Kohler Co.
Summary of Contents for K-13670
Page 31: ...1031173 2 B ...
