Install the Handshower (cont.)
Thread the handshower handle into the handshower holder.
To avoid kinking, remove any twists or loops in the hose.
2. Installation Checkout
Complete the installation of the valve, valve trim and any other
components according to the instructions packed with the
product.
Ensure all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks above and
below the bath or finished deck. Repair as needed.
Open both hot and cold valves and run water through the spout
(if installed) to remove debris. Check for leaks.
Check the handshower for smooth operation.
Confirm proper diverter operation.
Turn the valves to the closed position.
1041355-2-C
4
Kohler Co.
