5
97444-2-
AA
(-)
A.
Place in-line jamb against wall or knee
wall. Use a level to plumb jamb and
mark hole locations(s).
B.
Drill 3/16
″
diameter hole(s) and insert
anchor(s). Secure the in-line jamb to
wall or knee wall with No. 8-18 x 2
″
panhead screw(s).
4
INSTALL IN-LINE JAMB AND
IN-LINE PANEL
No. 8-18 x 2
Panhead Screw
Anchor
In-Line Jamb
(Front Side)
A.
Slide the in-line panel into the installed in-line jamb. Fit an in-line jamb
over the opposite side of the in-line panel.
IMPORTANT:
For some styles, do not adjust and secure panel
until “L” Jamb has been installed to the knee wall.
B.
Adjust the in-line panel and drill 1/8
″
diameter holes through the
in-line jambs and in-line panel side frames. Secure with No. 8-18 x
3/8
″
panhead screws.
5
INSTALL AND SECURE IN-LINE
PANEL
No. 8-18 x 3/8
Panhead Screw
Side
Frame
In-Line
Panel
In-Line Jamb
(Front Side)
No. 8-18 x 3/8
Panhead Screw
In-Line
Panel
Side
Frame
