2
97444-2-
AA
(-)
DO IT RIGHT! Use a Kohler Certified
Installer, (KCI), for the installation of your
Kohler Shower Door. Contact your
Kohler Distributor/Showroom or call
Kohler at 1-800-456-4537 for the KCI
nearest you.
Introduction
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. The Exploded Diagram of the Door on page13
will also provide a helpful reference when relating the
location of the various parts.
All information in these instructions is based on the
latest product information available at the time of
publication. Kohler Co. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
IMPORTANT CONSUMER INFORMATION
LIMITED ONE-YEAR WARRANTY
Kohler plumbing fixtures and fittings are warranted free of manufacturing
defects.
Kohler Co. will, at its election, repair, replace, or make appropriate
adjustment where Kohler Co. inspection discloses any such defects
occurring in normal usage within one year after installation. Kohler Co.
is not responsible for installation costs.
To obtain warranty service, contact Kohler Co. either through your Dealer
or Plumbing Contractor or by writing Kohler Co., Att: Consumer Affairs
Department, Kohler, WI 53044 U.S.A.
IMPLIED WARRANTIES INCLUDING THAT OF MERCHANTABILITY,
ARE EXPRESSLY LIMITED IN DURATION TO THE DURATION OF
THIS WARRANTY. KOHLER CO. DISCLAIMS ANY RESPONSIBILITY
FOR CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty
lasts, or the exclusion or limitation of incidental or consequential
damages, so this limitation and exclusion may not apply to you. This
warranty gives you specific legal rights. You may also have rights which
vary from state to state.
This is our exclusive written warranty.
KOHLER CO., KOHLER, WISCONSIN 53044
BASIC TOOLS AND MATERIALS NEEDED
TOOLS
6 foot folding rule or measuring tape
Hacksaw with 32 teeth per inch blade
Miter box or square
Hammer
Electric drill
Drill bit-3/16
″
Masonry bit for ceramic tile-3/16
″
Fine file
Screwdriver-Phillips
Level
Pencil
Safety glasses
Caulking gun
Knife
Pliers
MATERIALS
Masking Tape
Silicone Sealant (RTV)
HOW TO CARE FOR YOUR DOOR
NEVER USE SCOURING POWDER, PADS OR SHARP
INSTRUMENTS ON METAL WORK OR GLASS PANELS.
The use of a squeegee following each shower is
recommended to eliminate water spots on the inside of the
glass panels.
An occasional wiping down with a mild detergent diluted in
water is all that is needed to keep the panels and anodized
aluminum parts looking new.
CAUTION: TEMPERED GLASS CANNOT BE CUT.
