5
Kohler Co., Kohler, WI
112363–2–
AA
(0793)
TO CONNECT WATER SUPPLY
NOTE: Read carefully before performing this step.
For supply installation, refer to instructions packed with
shut-off valve. Carefully bend tubing to fit.
Cut tubing end 1/4” longer than distance between shut-off
valve and supply shank. Remove any burrs from inside of
tube.
Slip coupling nut, compression nut, and ferrule onto
tubing. Insert tubing into shut-off valve and supply shank,
positioning seal washer (supplied) or compression
washer (not supplied) as shown. Hand-tighten coupling
nut and then tighten compression nut.
CAUTION: Risk of product damage. Do not
overtighten or you may deform connections and
cause a leak. Do not use tools to tighten plastic nuts.
Fig. #9
Tubing
Ferrule
Supply Shank
Seal Washer
Coupling Nut
Compression Nut
Shut-Off Valve
Tubing
Ferrule
Supply Shank
Compression Washer
Coupling Nut
Compression Nut
Shut-Off Valve
