35-5/8" (905 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
240 V, 15 A, 50/60 Hz
Blower:
Technical Information
All product dimensions are nominal.
This bath is designed for drop-in installation only.
It is not suited for use in a three wall alcove with
an overhead shower.
Drop-in
Installation:
Center
Drain location:
46-3/4" x 21-5/8" (1187 mm x 549 mm)
Basin area, bottom:
69-15/16" x 34-3/8" (1776 mm x 873 mm)
Basin area, top:
130 lbs (59 kg)
Weight:
42 lbs/ft² (205.1 kg/m²)
Minimum floor load:
16-1/2" (419 mm)
Water depth:
71 gal (268.8 L)
Water capacity:
Drop-in, 1054544-7, required, included
Template:
Blower: 220-240 V, 5 A, 50/60 Hz, 300 W
Electrical component
rating:
Variable
Blower speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
3-18-2017 04:36
Escale
®
6' BubbleMassage
™
Bath
K-11343-G
