4
Insert capping plugs into the side entry holes in the pan.
1
Securely install the bung into the bottom inlet of the cistern. Place
the washers over the fixing screws and locate in cistern fixing holes.
2
Skip this page if installing a
bottom inlet cistern configuration.
Bung
Seal
Washer
Nut
Captivated Nut
(in pan)
Seal
Washer
Fixing Screw
Position the cistern on the pan
by centering the gasket on the
pan inlet. Securely tighten the
screws so the cistern is level.
3
Connect the supply hose to
the cistern inlet and connect the
hose to the water supply
shut-off valve.
Gasket
Screw
Pan Inlet
5
Connect the supply hose to the shut-off valve to test the system
for leaks. Shut off the water supply and disconnect the hose.
INSTALLATION INSTRUCTIONS
EVORA
TM
Back-to-Wall Toilet Suite
ENGLEFIELD
8
CISTERN INSTALLATION - TOP REAR ENTRY
Cistern Inlet
Hose
(supplied)
Side Entry Holes
