4
5
6
Place a washer onto each of the hexagon screws and fix the brackets
to the floor.
Position the toilet in the marked location, while ensuring an effective
connection is made with the pan connector.
Install the plastic screw sleeves and use the screws to fix the
toilet to the brackets. Attached the chromed caps to the screw heads.
For Side Entry/Bottom inlet installations, skip to Push Button Installation on page 9.
For Top Rear entry installations, proceed to Cistern Installation on page 8.
INSTALLATION INSTRUCTIONS
EVORA
TM
Back-to-Wall Toilet Suite
ENGLEFIELD
7
3
Drill fixing holes at the marked locations on the floor and insert the
anchors where required.
Anchor
Screw
Sleeve
Hole
Cap
Hexagon
Lag Screw
Bracket
Washer
Anchor
