background image

12 

17 

CFI230J

CFI230J

The unit should be cleaned regularly. 

Use a non abrasive cleaner (ideally with a pH value of 4 to 8) 

applied with a soft cloth. 

Under no circumstances should scourers or powerful 

detegents be used as these can damage the metallic 

surface of the frame and also tarnish the glass coating.

To avoid limescale, use your thumb or a soft cloth 

to wipe any limescale from the soft rubber nozzles 

and the front face of the showerhead.

CLEANING

Spray Settings

The handset has three different spray actions: 

Start, Soothe

 and 

Massage

 and an 

Eco

 setting. To adjust the 

spray setting turn the spray plate as follows:

1.  Start 

Water flows from the outer set of holes.

 

To select the Start setting, turn the spray plate 

 

anticlockwise from the full clockwise position 

 

until it clicks once.

2.  Soothe 

Water flows from the middle set of holes.

 

To select the Soothe setting, turn the spray plate 

 

anticlockwise from the full clockwise position until it

 clicks 

twice.

3.  Massage 

Water flows from the inner set of holes.

 

To select the Massage setting, turn the spray plate 

 

anticlockwise from the full clockwise position until 

 

it clicks three times.

4.  Eco 

Water flows from the outer set of holes at a 

 

reduced flow rate.

 

To select the Economy setting, turn the spray 

 

plate fully clockwise.

Spray Plate

Kohler Daryl and Kohler Mira

We take the question of customer service seriously.  Consequently, there is one initial point of contact – Daryl 
Showering Technical Services (0151-606-5000). This team will ensure that the quality of support you require is 
provided by specialists appropriate to that field; i.e. for matters relating to the shower enclosure, you will be 
aided by Daryl Showering and for the shower system (including the Digital Mixer), your call will be supported by 
Mira Showers personnel.

Your contact for all queries is Daryl Showering Customer Services (0151-606-5000)

If, when you first use your shower it does not function correctly, first contact your installer to check that 
installation and commissioning are satisfactory and in accordance with the instructions in this manual. 

If, over time, the performance of your shower declines, consult this manual to see whether simple home 
maintenance is required. Please call our Technical Services Department to talk the difficulty through, request 
service under guarantees (if applicable) or take advantage of our after-sales service.

CUSTOMER SERVICE

Summary of Contents for CFI230J















Reviews: