Kohler C3-300, Homeowner'S Manual

Page: 16 / 28

1367362-T01-E 16 Kohler Co.
PREPARATIONS BEFORE INITIAL OPERATIONS /
初次使用前准备
■
Ensure if water inlet valve is OPEN.
确认进水阀是否已打开。
■
Connect water inlet hose according to Installation Guide. Open water
stop valve, and plug power cord.
按安装说明书接上进水软管，打开止水阀，插上电源。
■
Plug power cord into socket. Bidet seat generates one short beep,
wand extends and retracts once, and the indicator on the side panel
blinks until initialization completes.
当电源线插上电源插座，便盖发出短蜂鸣
1
次，喷管伸缩
1
次，侧键盘
上指示灯闪烁，直至初始化结束。
■
During initialization, it is normal to hear motor rotating and water flow.
初始化过程中，可听到电机转动声和流水声，均属正常。
■
Test according to “USE GUIDE” section.
参照“使用指导”章节进行测试。
■
Factory settings for initial use.
初次使用时为出厂设置状态。
Front wash: Water temp: Mid
• Water flow: Mid Seat temp: Mid
• Spray position: Mid Air temp: Mid
Lighting: ON
Rear wash: Energy save: OFF
• Water flow: Mid Auto deodorizing: ON
• Spray position: Mid Long seat-on reminder: OFF
Massage: OFF
女用： 水温：中档
•
水流强度：中档 圈温：中档
•
冲洗位置：中档 风温：中档
夜灯功能：开启
臀洗： 节能模式：关闭
•
水流强度：中档 自动除臭：开启
•
冲洗位置：中档 长时落座提醒：关闭
按摩功能：关闭
The above settings are for the full-functional version. For differences in
the specifications of models, refer to their product configuration matrix.
以上设置为全功能版本，具体型号的规格差异见产品配置表。
USE GUIDE /
使用指导