2. Install the Gap Panel Clips
NOTICE:
Complete these steps only if you will use the
provided gap panel to fill a gap between the bath rim
and the walls.
Use the hardware provided to secure the four gap
panel clips to the bath rim. Use the pre-drilled holes
in the back and drain-end rim.
·
2.
·
3. Level the Bath
Adjust the feet under the bath to make it level.
Adjust the height of the bath to the height marked in
the Roughing-In. Tighten the nut on the adjustable
feet to settle the height of the bath.
·
3.
·
Gap Panel Clip
Level
-7-
1397340-T01-A
