-10-
5.
Notice:
a. Don't twist, circle or pull the manual line to
avoid it from broken.
b. Don't adjust the screws on the manual
lever assembly, or it will affect the
operation of the assembly.
Mount the manual lever assembly onto the bracket with
screw.
Manual Lever Assy.
Screws
5
.
a.
b.
,
6.
Notice:
Don t connect to power supply while installing the cover.
Connect the solenoid valve connector and speed detector
on the control box with the corresponding cords
of the solenoid valve. Install the sensor cover with control
box as shown by the figure:
a. Buckle the sensor cover into the wall slightly above the
bracket assy.
b. Press the sensor cover down along the wall and fit
tightly into the bracket assy.
c. Push upward with basin wrench and rotate clockwise to
lock the sensor cover (rotate counterclockwise to
remove the sensor cover).
a.
b.
c. Prevent damage or drop of the cover or
break the cord during this procedure.
d. Please observe the indicator from the
bottom of the sensor cover upwards.
connector
connector
Ensure the tightness of the
to
avoid them from wetting
Wear clean gloves when installing the
sensor cover to avoid surface injury by
cement or sand
.
.
'
a
b
Solenoid Valve
(
)
Connector
Speed Detector
(
)
Connector
Indicator
6.
,
a.
b.
c.
(
)
a.
b.
c.
d.
c
90
o
1046837-T01-D
