Secure the Drawer Assembly (cont.)
Secure the drawer assembly to the finished wall with two 5/16
″
lag bolts and washers (not provided).
Secure the drawer assembly to the vanity using two #8 x 1-1/2
″
panhead screws (provided).
Install the Second Vanity
Install the second vanity according to the instructions packed
with the vanity. Ensure the vanity is flush against the drawer
assembly before securing the vanity to the wall.
Using a 1/8
″
drill bit, drill two pilot holes through the side of the
drawer assembly and into the second vanity.
Secure the drawer assembly to the vanity using two #8 x 1-1/2
″
panhead screws (provided).
1221226-2-B
4
Kohler Co.
