Tools and Materials
Before You Begin
NOTE:
This product is designed to be installed between two
vanities or between a vanity and a wall and is not intended to be
installed individually. Read both product installation instructions
before beginning. One vanity should be installed before installing
the drawer assembly.
Observe all local building codes.
Secure the drawer assembly to stud framing. When possible,
provide 2x6 bracing behind the finished wall for additional
support. Refer to the vanity installation instructions for stud
framing and site preparation.
The appearance of your product may differ from the illustration
in this guide. The instructions still apply.
To ease installation, remove drawers before beginning. Refer to
the section in this guide for proper removal.
Plus:
• Wood Screws
• 2x6s
• 5/16" Lag Bolts and Washers
[Min 250 lb (113.4 kg) Load Bearing]
• Socket Wrenches
• Shims
1221226-2-B
2
Kohler Co.
