1. Prepare the Site
NOTICE:
Provide adequate floor support.
NOTICE:
Measure your product for site preparation. Note the
model number
located on the packaging
label, then visit the product page at kohler.com for additional information.
Determine the location of the bath.
Make sure that the subfloor offers adequate support for the bath.
Ensure that the subfloor is level.
IMPORTANT!
To ensure a successful installation, install the bath on a level finished floor.
Position and install a standard PVC or brass drain pipe. Install the drain pipe so it extends
″
X
″
above the finished floor. Refer to the table for the
″
X
″
dimension.
K-8337
1/2" (13 mm) Min - 3/4" (19 mm) Max
K-8336
1/2" (13 mm) Min - 3/4" (19 mm) Max
K-8335
1/2" (13 mm) Min - 3/4" (19 mm) Max
K-8334
1-1/8" (29 mm) Min - 1-3/8" (35 mm) Max
K-8333
5/8" (16 mm) Min - 7/8" (22 mm) Max
K-8332
5/8" (16 mm) Min - 7/8" (22 mm) Max
K-8331
5/8" (16 mm) Min - 7/8" (22 mm) Max
Bath Model
"X" Dimension
K-1800
1-7/8" (48 mm) Min - 2-1/8" (54 mm) Max
X
Finished Floor
Drain
Pipe
Kohler Co.
3
1305896-2-B
