14
8.
Turn the
top
knob to the
ECO
position. The temperature of the
water should rise slightly. Allow a few
seconds for the warm water to reach
the showerhead - this shows that the
medium
power setting is operating
correctly.
9.
Turn the
top
knob to the
HIGH
position. The temperature of the
water will rise further - this shows
that the full power setting is operating
correctly.
10.
Set the shower temperature by
rotating the
bottom
knob as
necessary. Turn the knob clockwise
for hotter water and anticlockwise for
cooler water.
Note!
When the temperature
is changed the flow rate will
change.
11.
When the required temperature is
reached, push the
stop
button to
stop the flow. Water will continue to
flow from the showerhead for a few
seconds, as water is purged from the
tank. Isolate the power at the double
pole switch.
Stop Start
