5.4
CLEANING INSTRUCTIONS
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool.
5.4.1
Cleaning the metal painted parts / optional trim
These metal painted parts should only be cleaned using a clean, damp cloth.
Abrasive cleaners, chemical cleaning agents or any type of polish must
never be used as damage to the finish may result.
5.4.2
Cleaning the fuel-bed
We do not recommend cleaning of logs or fuelbed components as these are fragile
and damage may result.
None of these parts must be washed or exposed to
any cleaning agents or water
. Any damaged parts must be replaced by
contacting your dealer or telephoning BFM Europe on the number stated on the
rear cover of this book. Logs must only be replaced with a complete and genuine
replacement set and the fire must never be run with the wrong number or
damaged logs. The fuelbed must be carefully re-assembled as stated in the
following section.
5.4.3
Cleaning the glass panel
To clean the glass panel, please remove it from the product as described
overpage. Use a clean damp cloth and ceramic glass cleaner to remove any
stains or deposits from the glass panel. Do not using scouring pads as this may
scratch the surface finish of the glass panel.
PLEASE NOTE :- The glass will require cleaning periodically. Condensation
produced by the products of combustion will create marks on the inside face of the
glass panel.
33