![background image](http://html2.mh-extra.com/html/valor/legend-g3-5/legend-g3-5_installation-instructions_3456097001.webp)
4005863-01
717BPB 3-Sided Backing Plate
Use with
716EH and 721ED Edgemont Trim and Door
fi tted to
Valor 700 Models only
The 717 3-Sided Backing Plate is intended to be used
with the 716 Edgemont Hammerered Trim Kits or the
721 Edgemont Door Kits to install on the Valor heater
model 700.
The 717 combined with the 716 or 721 can also be
installed with an additional backing plate 710BPB or
714BPB as well as a riser trim 725RT or 793RT to
cover larger cavity opening.
717BPB with 716 Edgemont Hammered Trim
© Copyright Miles Industries Ltd., 2016
36-1/4” (922 mm)
1/2”
(13 mm)
1-1/2”
(38 mm)
26-5/8” (677 mm)
I N S TA L L E R
Leave this manual
with the appliance.
C O N S U M E R
Retain this manual
for future reference.
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
L
EGEND
G3.5
Installation Instructions
Mounting of the 717 does not affect clearances or other
specifi cations listed in the heater installation manuals—
see installation manual supplied with the heater for
more information.
700 engine
717BPB Backing Plate
Edgemont Hammered Trim
and side doors
Overview—shown with 716EH Edgemont Trim
(engine, Edgemont Hammered Trim Kit sold separately)